Language

 

 


Izgara - Screens

Izgara - Screens 2

Kapaklar - Penstock

Kapaklar - Penstock 2

Konveyörler - Conveyors

Konveyörler - Conveyors 2

Kum Ayırıcılar - Grit Classifier

Kum Ayırıcılar - Grit Classifier 2

Havalandırıcılar - Aerators

Havalandırıcılar - Aerators 2

Yoğunlaştırıcılar Sıyırıcılar Thickeners scrapers

Yoğunlaştırıcılar Sıyırıcılar Thickeners scrapers 2

Filtreler Yağ Tutucular - Filters Bio Separators Mixers

Filtreler Yağ Tutucular - Filters Bio Separators Mixers 2

Çamur Susuzlaştırıcılar - Sludge Dewatering Containers

Çamur Susuzlaştırıcılar-Sludge Dewatering Containers 2

Çamur ve Koku Arıtımı - Sludge and Odour Treatment

Çamur ve Koku Arıtım - Sludge and Odour Treatment 2

Temizsu Arıtma-Package System

Atıksu Arıtma-Package System2

 
Kapaklar
kapaklar
BIOLAND weir gates are rectangular shaped steel construction to be widelly used for level control. Gates have a large dimensional range. The gates are designed according to dimensions and mainly consisting of; 01- FRAME : It is the base of the system .Weir gates are designed with full frame. The frame is manufactured from mild steel or stainless steel profile. 02 - DOOR: Door is designed with flat surface and runs in slide rails up and down. It is made of mild steel or stainless steel material. 03 - SEAL: P type rubber seal is used as sealing element and sealing is applied on 3 sides of weir gates. The standard material for seals is EPDM. For different applications, please ask seal material to BIOLAND. 04 - SPINDLE : BIOLAND standard gates are rising spindle type, but non-rising spindle type gate is also available. Up to approximately 1500 mm width, single spindle is used; for greater widths the double spindles model is generally used. 05 - DRIVE UNIT : All sized gates can be supplied either for manual operation or with electric/pneumatic actuato

 

kapaklar

All electric actuators are equipped with manual drive (hand wheel) for emergency. Electric actuators should be selected according to operation type of gates. In other words, different actuator types are used for on-off operated gates and modulating operated gates. Special types electric actuators are available for explosion proof applications and the applications at sites having harsh weather conditions. Manual drive means handwheel for small sized gates and bevel gearbox for large size gates.
Two pieces bevel gearbox unit are used for both manual and automatic double spindle gate applications.

     
stoploglar

 

 

Stoploglar, su alma yapılarında, su ve atıksu arıtma
tesislerinde, akısı kontrol etmek amacı ile yaygın
olarak kullanılan kapaklardır. Stoploglar, diger
tiplerde oldugu gibi çelik veya paslanmaz çelik
malzemeden üretilmektedir ve atıksuyun etkilerine
karsı dayanıklıdır. Stoploglar tek parça olarak yapılabildigi gibi, daha esnek kullanım gerektiren uygulamalarda segmentler halinde parçalı olarak da
üretilmektedir.

stoploglar

Stoplogs, water intake structures, water and
wastewater treatment plants, to control the flow is
widely used for the purpose of the cover are.
Stoplogs, as in other types of steel or stainless
steel material is produced and is resistant to the
effects of wastewater. Stoplogs can be made in
one piece, such as applications requiring a more
flexible use in segments as parts are produced.